It’s only a little bit of dust, it can’t hurt me.
As a miner, construction worker, or oil & gas engineer you might be handling seriously heavy machinery and equipment day in and day out, so a little bit of dust may seem trivial.
But construction dust is much more than just a nuisance - it can seriously affect your health and certain types over time can even kill.
Respirable crystalline silica dust is one such killer - and with more than 2 million workers being exposed to silica dust every year in the workplace it is vital that everyone involved understands the risks and what can be done to prevent irreparable harm.
What Is Silica?
To get scientific about it ‘silica’ is a chemical compound formed from silicon and oxygen atoms. It comes in two forms; hazardous crystalline, or non-hazardous amorphous. And it is crystalline silica that causes all the trouble.
Crystalline silica is one of the most abundant minerals on earth, found in numerous naturally occurring materials such as rock, sand, stone, clay, and gravel.
These materials are the fundamental building blocks used to make building and landscaping materials such as bricks, tiles, roof slate, concrete, glass, ceramics and some plastic composites. Silica is also present during many common construction tasks such as excavating, mining, quarrying, and tunnelling.
Therefore silica is found widespread across the mining, construction, and engineering sectors all throughout the world.
Left within its material, silica is safe.
It is when it’s disturbed that the crystalline silica becomes one of the most common workplace hazards.
What Is Respirable Crystalline Silica (RCS)?
Respirable crystalline silica is the dust that is released from the silica-containing materials during high-energy operations such as sawing, cutting, drilling, sanding, chipping, crushing, or grinding.
These very fine particles of the crystalline silica are now released into the air becoming respirable dust.
Common scenarios where people may be exposed to respirable crystalline silica dust include abrasive blasting, mining and excavating, cement, steel and ceramic production, and many many more.
- Silica Exposure In Mining
Miners often extract high-silica-content rock from the coal seam or the surrounding strata. Large quantities of silica dust can be generated during cutting and can become entrained in the ventilating air, which can carry the dust to the breathing zones of mine workers.
Find out more about Howden Mine Ventilation
- Silica Exposure In Cement Production
High levels of dust can be produced when cement is handled, for example when emptying or disposing of bags. Scabbling or concrete cutting can also produce high levels of dust that may contain silica.
Find out more about Howden's Centrifugal Fans used during cement production
Silica dust is very fine, much smaller than a tiny grain of sand found on a beach. This is what makes it so easy to inhale.
If you look at the full stop at the end of the previous sentence, that is around 200-300 micrometres in diameter. Whereas the respirable crystalline silica particle is only 5 micrometres in size.
If inhaled it can create a health hazard all the way from simple and instant irritation to life-changing and often life-threatening lung diseases.
Crystalline silica is a designated known human carcinogen meaning it is a definite cause of cancer in humans.
Once you breathe it in it can go deep into your lungs and stay there - permanently scarring and damaging the lung tissue.
Breathing this dust over a long period of time can eventually lead to life-changing and very serious lung diseases such as emphysema, bronchitis and silicosis. As well as lung cancer, kidney disease, and chronic obstructive pulmonary disease (COPD).
The chances of developing these diseases increase with higher and longer durations of exposure.
The most at risk to develop these diseases are miners, construction workers, and oil & gas engineers that are often performing the tasks or processes that release the dangerous respirable crystalline silica dust.
FACT: Approximately 2.3 million workers were exposed to silica dust in the workplace. Over 500 construction workers are believed to die from exposure to silica dust every year.
What Is Silicosis?
Silicosis is an incurable and irreversible lung disease that results from the inhalation of silica dust which inflames and scars the lungs causing shortness of breath, coughing, and over time it can be a potentially fatal condition resulting in death.
The common length of time for silicosis to develop when being exposed regularly is between 10 and 20 years. But, in some cases with extremely heavy silica exposure it can develop within a few months to a year.
Once the very fine silica dust particles are breathed in they go deep into the lung where it is attacked by the immune system.
This causes swelling and a hardening of the lung tissue also called fibrosis, causing the lung tissue to become permanently scarred and no longer able to function properly.
The symptoms of silicosis may take years to develop, even after you have stopped working with silica dust. They are irreversible and will continue to get worse the longer you are exposed.
The main symptoms of silicosis are:
- A persistent cough
- Shortness of breath
- Weakness and fatigue
How much dust is too much dust?
The typical exposures to silica in the building and construction industry are required by law to be limited to a maximum exposure of 0.1mg/m3 with many countries restricting it further to 0.05mg/m3 or as low as 0.025 in some states of Canada.
To put into context the maximum daily silica exposure in comparison to a penny -
How Can Silica Dust Be Prevented Or Controlled?
Due-diligence is extremely important to prevent any health hazards relating to silica dust.
Both the employers and the employees must fully understand what they are working with and what risks are involved.
In certain countries including Britain, it is the employer’s legal responsibility to carry out risk assessments where there is exposure to silica and to implement effective control measures where required.
Following the health and safety laws that are put in place is not only essential but life-saving.
Note these laws and legislation can vary between countries, territories, and states.
Who enforces the laws?
In Britain, the Control of Substances Hazardous to Health (COSHH) is the most relevant. In other European countries, the Chemical Agents Directive is the main source of legal requirements.
There are other bodies such as The Occupational Safety and Health Administration (OSHA) and the Health and Safety Executive (HSE) that also layout guidelines and measures that should be followed.
As an employer there are three key things you need to do to help reduce or prevent exposure to workers:
- Assess the risks
- Control the risks
- Review the controls
1. Access the risks
This is where the employer must identify any risks and hazards from silica dust and ideally see if they can be eliminated, substituted, or failing that put controls in place to reduce any risk.
They must look at each of the following:
- The task or activity itself - which materials are used with which tools
- How much dust will be generated
- Who will be exposed
- The work area - is it in an enclosed space or outside
- The time spent working on the task
- The frequency of doing the task over a period of time
- How the task will be cleaned up
2. Control the risks
The aim is to eliminate or minimise the generation of silica dust or prevent the excessive breathing in of it.
For the most common construction tasks that generate high exposures to RCS, OSHA has provided a table of controls that an employer must fully and properly implement to maintain the exposure limits enforced - Table 1 – Specified Exposure Control Methods When Working With Materials Containing Crystalline Silica of the silica standard.
If a task is not on that list there are a number of common-place controls that can be implemented including:
- Choose materials that are silica-free or have a low amount of silica content eg. use metallic shot, slag products, or grit for abrasive blasting rather than sand
- Use local exhaust ventilation or dust extraction systems that sucks away the dust before it can be breathed in. There are tools with built-in extraction controls used to capture the dust while in use - often these are dust collecting bags
- Damp down dust aka wet dust suppression - this can be via a fitted water attachment or using water sprays to suppress the dust
- Fit large machinery/ vehicles with cabs that have an effective air filtering system
- In addition to other controls use respiratory protective equipment (RPE)
FACT: Local exhaust ventilation or wet dust suppression has been shown to reduce dust by up to 99%
Outwith these physical controls, all employees should also receive the correct training and be given information on the possible risks of crystalline silica exposure, the control measures and how to use them, and any requirements for health surveillance.
3. Review the controls
Now that the controls have been implemented to eliminate, reduce, or manage the silica dust exposure, the controls should be routinely checked and monitored to ensure they are effective.
This can be done by:
- Air monitoring - to make sure that the levels are below the maximum limits enforced within the country or state. This can be done using a dust lamp aka a ‘Tyndall beam’
- Health surveillance Using equipment to measure the amount and quality of airflow that a person is breathing
- Training records Keeping track of who has been trained is an easy way of keeping on top of things
- Maintaining equipment and making any repairs
No matter what country, what task, or what workplace there is a duty of care for employers and workers to ensure that health and safety standards are implemented and upheld.
Howden fans play a key role in maintaining safe processes within mining, steel, and cement industries.
From moving materials and collecting dust in the cement & steel manufacturing process or providing clean air to mines.
Find out everything you need to know about Howden Fans